INVESTIGATION OF MECHANICAL AND METALLOGRAPHIC PROPERTIES OF TWO DIFFERENT ALUMINUM ALLOYS JOINED WITH FRICTION STIR WELDING METHOD USING DIFFERENT WELDING PARAMETERS

Basit Öğe Kaydı
dc.contributor.authorOcalir, Seref
dc.contributor.authorEsme, Ugur
dc.contributor.authorBoga, Cem
dc.contributor.authorKulekci, Mustafa Kemal
dc.date.accessioned2025-03-17T12:27:47Z
dc.date.available2025-03-17T12:27:47Z
dc.date.issued2020
dc.departmentTarsus Üniversitesi
dc.description.abstractIn this study two aluminum alloy materials of EN AW-5083-H111 and EN AW-6082-T651 were joined with Friction Stir Welding considering the parameters as the tool shoulder diameter, spindle speed and feed rate. The mechanical properties of the weld joints such as yield strength, tensile strength and micro-hardness and metallographic properties were investigated comparatively with the use of these welding parameters. The yield strength of the weld joints were determined to be between 136-217 MPa while the tensile strengths were between 159-230 MPa and the percent elongations were between 2.28-5.44 %. The hardness values measured in weld areas were higher in the EN AW-6082 base metal side compared with EN AW-5083 base metal side.
dc.identifier.endpage1349
dc.identifier.issn1304-7205
dc.identifier.issn1304-7191
dc.identifier.issue3
dc.identifier.scopus2-s2.0-85149887665
dc.identifier.scopusqualityN/A
dc.identifier.startpage1333
dc.identifier.urihttps://hdl.handle.net/20.500.13099/2447
dc.identifier.volume38
dc.identifier.wosWOS:000575787500019
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherYildiz Technical Univ
dc.relation.ispartofSigma Journal of Engineering and Natural Sciences-Sigma Muhendislik Ve Fen Bilimleri Dergisi
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WOS_20250316
dc.subjectAluminum alloy
dc.subjectfriction stir welding (FSW)
dc.subjectmechanical properties
dc.subjectmetallographic properties
dc.titleINVESTIGATION OF MECHANICAL AND METALLOGRAPHIC PROPERTIES OF TWO DIFFERENT ALUMINUM ALLOYS JOINED WITH FRICTION STIR WELDING METHOD USING DIFFERENT WELDING PARAMETERS
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu