Investigation of The Effect of Micronized Ethylene-Propylene-Diene Monomer (EDPM) Powder Wastes on Physical and Mechanical Properties in EPDM Mixtures
dc.contributor.author | Cokacar, Cagri | |
dc.contributor.author | Köprü, İlker | |
dc.contributor.author | Yetgin, Salih Hakan | |
dc.date.accessioned | 2025-03-17T12:18:33Z | |
dc.date.available | 2025-03-17T12:18:33Z | |
dc.date.issued | 2023 | |
dc.department | Tarsus Üniversitesi | |
dc.description.abstract | In this study, micronized-ethylene-propylene-diene monomer powders (m-EPDM) by the physical crushing method were added to EPDM rubber, and their effects on physical and mechanical properties were examined. Micronized EPDM powders were added at rates of 10-20-30%. EPDM rubber was pulped with micronized EPDM powder using a 1.5-liter laboratory type mini banbury. The obtained paste was vulcanized in the press at 180 °C for 20 min., and test plates were acquired. Rheological and fluidity properties of EPDM rubber with m-EPDM powder added were examined by pre-press rheometer (Moving Die Rheometer_MDR) and Mooney viscosity tests. Tensile and permanent deformation tests were performed to determine mechanical properties density, Shore A hardness tests were performed to determine physical properties and dispersion analysis was performed to distribute the additives in EPDM rubber. As a result of the study, minimum torque (ML) values increased while maximum torque (MH) values decreased depending on the amount of m-EPDM. Mooney viscosity of EPDM/30m-EPDM rubber increased by 40.9%. It was observed that cure rate index (CRI) did not change depending on the amount of m-EPDM. With the addition of 30% m-EPDM, breaking strength decreased by 39.2%, and elongation at break was reduced by 9.87%. | |
dc.identifier.doi | 10.52795/mateca.1375512 | |
dc.identifier.endpage | 136 | |
dc.identifier.issn | 2717-7475 | |
dc.identifier.issue | 3 | |
dc.identifier.startpage | 129 | |
dc.identifier.trdizinid | 1220603 | |
dc.identifier.uri | https://doi.org/10.52795/mateca.1375512 | |
dc.identifier.uri | https://search.trdizin.gov.tr/tr/yayin/detay/1220603 | |
dc.identifier.uri | https://hdl.handle.net/20.500.13099/852 | |
dc.identifier.volume | 4 | |
dc.indekslendigikaynak | TR-Dizin | |
dc.language.iso | en | |
dc.relation.ispartof | İmalat Teknolojileri ve Uygulamaları (Online) | |
dc.relation.publicationcategory | Makale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı | |
dc.rights | info:eu-repo/semantics/openAccess | |
dc.snmz | KA_TR_20250316 | |
dc.subject | Physical properties | |
dc.subject | EPDM rubber | |
dc.subject | Micronized EPDM powde | |
dc.subject | r Rheological properties | |
dc.title | Investigation of The Effect of Micronized Ethylene-Propylene-Diene Monomer (EDPM) Powder Wastes on Physical and Mechanical Properties in EPDM Mixtures | |
dc.type | Article |