Mathematical Modeling and Optimization of Milling Parameters in AA 5083 Aluminum Alloy
[ X ]
Tarih
2019
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
An experimental study was carried out to determine the effect of different cutting parameters such as feed,spindle speed and depth of cut on surface roughness in face milling of 5083 aluminum alloy. The mathematicalmodel was developed to estimate surface roughness using Response Surface Methodology. The significantcontribution of cutting parameters was detected by analysis of variance. Statistical analysis indicated that feedand spindle speed have the most considerable influence on surface roughness. After developed mathematicalmodel, desirability function analysis was performed to minimize the surface roughness. The lowest surfaceroughness (0.41 µm) was acquired at a feed of 3008 mm/min, a spindle speed of 5981 rpm and a depth of cut of0.54 mm.
Açıklama
Anahtar Kelimeler
Mühendislik, Makine
Kaynak
European Mechanical Science
WoS Q Değeri
Scopus Q Değeri
Cilt
3
Sayı
4
