Performance simulation of expander-compressor boosted subcooling refrigeration system

Basit Öğe Kaydı
dc.contributor.authorErdinc, Mehmet Tahir
dc.date.accessioned2025-03-17T12:27:07Z
dc.date.available2025-03-17T12:27:07Z
dc.date.issued2023
dc.departmentTarsus Üniversitesi
dc.description.abstractMany applications have made extensive use of refrigeration systems, which have a high energy requirement. Any improvement on the refrigeration systems can reduce the need for energy demand. A common method to improve the system performance is to subcool the condenser exit temperature and known as subcooling. An expander-compressor booster enhanced subcooling vapor compression cycle is proposed as an addition to the subcooling systems described in the literature. The refrigerant is split into two parts at the condenser exit: one portion expands in the expansion device to reach the necessary subcooling temperature, while the other part goes straight into a separate heat exchanger. Later, this additional refrigerant flows into the other expansion valve, the evaporator, and a booster expander-compressor to increase inlet pressure of compressor. As working fluids, six distinct refrigerants including low global warming potential (GWP) are used (namely R134a, R1234yf, R32, R290, R1270, and R600a) in simulations. The coefficient of performance (COP) and increment in COP values for each refrigerant are computed and graphically displayed for various evaporation temperatures between-10 degrees C and 5 degrees C. Furthermore, the heat exchanger analysis of subcooling heat exchanger is performed to compare heat transfer surface area and pressure drop for each refrigerant. Results indicate that R1234yf achieves the greatest performance with an increase in COP by 16.7, 19.1 and 21.8% depending on the mechanical efficiencies of the expander and compressors and as well as isentropic efficiency of the expander. By utilizing an expander -compressor with higher or lower mechanical and isentropic efficiencies, these enhancements can be raised or lowered. Heat exchanger analyses show that the pressure drop in the exchanger does not significantly affect the performance of the system.
dc.identifier.doi10.1016/j.ijrefrig.2022.12.013
dc.identifier.endpage247
dc.identifier.issn0140-7007
dc.identifier.issn1879-2081
dc.identifier.scopus2-s2.0-85150363259
dc.identifier.scopusqualityQ1
dc.identifier.startpage237
dc.identifier.urihttps://doi.org/10.1016/j.ijrefrig.2022.12.013
dc.identifier.urihttps://hdl.handle.net/20.500.13099/2088
dc.identifier.volume149
dc.identifier.wosWOS:000972688800001
dc.identifier.wosqualityQ1
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthorErdinc, Mehmet Tahir
dc.language.isoen
dc.publisherElsevier Sci Ltd
dc.relation.ispartofInternational Journal of Refrigeration
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WOS_20250316
dc.subjectRefrigeration
dc.subjectExpander
dc.subjectSubcooling
dc.subjectCOP
dc.titlePerformance simulation of expander-compressor boosted subcooling refrigeration system
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu