Mechanical and Tribological Performance of Polypropylene/Tin Powder Composites

Basit Öğe Kaydı
dc.contributor.authorGulesen, Mustafa
dc.contributor.authorYetgin, Salih Hakan
dc.contributor.authorUnal, Huseyin
dc.date.accessioned2025-03-18T12:27:48Z
dc.date.available2025-03-17T12:27:48Z
dc.date.issued2022
dc.departmentTarsus Üniversitesi
dc.description.abstractIn this study, the effect of Tin powder filler content on the mechanical and tribological performance of Tin filled Polypropylene (PP) composites were investigated. Polypropylene composites were prepared in a Brabender kneading chamber. The melt was transferred to a laboratory hot press and compression molded into samples for tests. The mechanical performances of the polymer based composites were determined by tensile and notched izod impact tests. The tribological tests were carried out in dry condition using pin-on-disc at 0.5-1.5 m/s Sliding Speed (SS) and 10-30 N loads. The mechanical test results demonstrated that the incorporation of Tin powders increased the Tensile Strength (TS) (5.6%), tensile modulus (TM) (19.8%) and izod Impact Strength (IS) (41.8%) while decreased the Elongation at Break (EB) (80%) values of Tin powder filled PP composites. The Friction Coefficient (COF) and Specific Wear Rate (SWR) decreased with the increase in filler content. The COF of unfilled PP, PP-8% Tin powder, PP-16% Tin powder and PP-24% Tin powder composites decreased about 20%, 23.4%, 21.8% and 29.3% with the increase in applied load from 10 N to 30 N. The SWR of the Tin powder filled PP composites decreased by 91% compared to unfilled PP polymer at 1.5 m/s speed and 30 N load value.
dc.identifier.endpage739
dc.identifier.issn0022-4456
dc.identifier.issn0975-1084
dc.identifier.issue7
dc.identifier.scopus2-s2.0-85140275334
dc.identifier.scopusqualityQ2
dc.identifier.startpage730
dc.identifier.urihttps://hdl.handle.net/20.500.13099/2455
dc.identifier.volume81
dc.identifier.wosWOS:000860751600004
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherNatl Inst Science Communication-Niscair
dc.relation.ispartofJournal of Scientific & Industrial Research
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WOS_20250316
dc.subjectCoefficient of friction
dc.subjectMechanical properties
dc.subjectNotched izod impact
dc.subjectTensil
dc.subjectTribology
dc.titleMechanical and Tribological Performance of Polypropylene/Tin Powder Composites
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu